Concrete Shear - Cut reinforced concrete beams
Rail Shear - Cut railway tracks
Re-Bar Shear - Cut waste reinforcing steel (reBar)
Quick Hitch - Quick Coupler attachments for excavator
Strut Hook Hitch - Quick change attachment strut arm connection
Wood Shear - Cut waste wood, logs, stumps down to small size
Grapple Jaw - Material Handler mechanical attachment for grabing products
Steel Shear - Cut scrap steel using an excavator
Pulveriser Jaw - Crush concrete and remove reinforcing steel
Boom Hitch - Quick coupler for excavator boom and stick
Power Shear - Cut large scrap steel using an excavator
Hydraulic Breaker - Excavator hydraulic hammer for breaking rock and concrete down to small size
Alligator Shear - Cut and separate Aluminium and Stainless scrap steel
40' Container Tilter - Tilter for Load and Unload of 40' and 20' shipping container to 50 degree angle
20'Container Tilter - Tilter for Load and Unload of 20' shipping container to 90 degree angle
Hydraulic Grapple - Material Handler attachment using hydraulics to rotate and grab products
Multi Processor - Demolition Tool using excavator hydraulics for rotating jaw power
Vibrating Compactor - Vibration Compactor for soil compaction and post ramming
Wire Stripper - Strip PVC plastic cothing off copper and aluminium electrical wire
Cable Granulator - Granulate PVC plastic cothing and copper and aluminium electrical wire
  Steel Shear

Process light and medium gauge scrap faster and more efficiently
 

ADVANTAGES
Value and Speed: Preferred tool for processing of light and medium gauge scrap steel. Cycling 12-14 times per minute, this tool is faster and is a fraction of the cost of comparable hydraulic mobile shears.

Innovative Blade Configuration: The Steel Shear utilizes seven identical blades with eight usable edges for shearing and piercing. Maximum utilization means less consumables. Threaded blades allow for easy shimming and replacing.

Extra Heavy Duty Pivot Group: High tensile shaft, case hardened with a 360 degree lubricating system and fitted with semi-self lubricating bushes. An increase in the bearing surface area by 40 -50% and an increase in pivot length, together with a two-into three pivot configuration creates greater jaw rigidity and better bearing load distribution.

Anti-Jam: New anti-jam relief rebate below blade surfaces releases thin, potentially jawjamming material faster. Threaded blades allow for easy removal in case of jam.

Tough: Thicker manufactured material sections and the use of high tensile steel for fabrication gives the Steel Shear greater durability and rigidity.

Greater Apex Shear Force: The blade apex (shear vee) has been moved closer to the main pivot even though the main pivot is larger in diameter. This enables the Steel Shear to start cutting at its point of greatest force.

More Power-Faster Change: The Power- Positive attachment coupling system creates 25% more power and allows fast changeovers to OEM buckets and other A-Ward attachments such as Re-bar Shear, Rail/Wire Shear, Grapple Jaw, Concrete Shear, Pulveriser Jaw, and Sieve Rakes.

APPLICATIONS
Demolition: Excels at primary demolition of light to medium gauge I-Beams, channel, racking, re-bar, and tanks.

Scrap Processing: Perfect for fast processing of light and medium gauge material. Works well as a companion to a hydraulic shear as a primary sorting tool.

Tyre Processing: High speed manipulation slicing and reduction of large truck and loader tyres. Cuts through rubber like butter.

THE A-WARD SOLUTION
At A-Ward Attachments we pride ourselves on providing economical and comprehensive attachment solutions for today’s demolition contractors and recyclers. Our patented Power-Positive attachment coupling system allows the operator to change to OEM Buckets and other A-Ward attachments in less than one minute.

Rebar Shear: Innovative shear turns tangled re-bar into valuable scrap. Sequenced jaws set one foot apart make three cuts per stroke. Maximize profit for demolition jobs and concrete recycling operations.

Grapple Jaw: Severe duty Grapple Jaw features AR 400 construction, thicker skins, and multiple box section anti-torsion stiffeners. Performs in the harshest demolition and scrap handling environments.