Concrete Shear - Cut reinforced concrete beams
Rail Shear - Cut railway tracks
Re-Bar Shear - Cut waste reinforcing steel (reBar)
Quick Hitch - Quick Coupler attachments for excavator
Strut Hook Hitch - Quick change attachment strut arm connection
Wood Shear - Cut waste wood, logs, stumps down to small size
Grapple Jaw - Material Handler mechanical attachment for grabing products
Steel Shear - Cut scrap steel using an excavator
Pulveriser Jaw - Crush concrete and remove reinforcing steel
Boom Hitch - Quick coupler for excavator boom and stick
Power Shear - Cut large scrap steel using an excavator
Hydraulic Breaker - Excavator hydraulic hammer for breaking rock and concrete down to small size
Alligator Shear - Cut and separate Aluminium and Stainless scrap steel
40' Container Tilter - Tilter for Load and Unload of 40' and 20' shipping container to 50 degree angle
20'Container Tilter - Tilter for Load and Unload of 20' shipping container to 90 degree angle
Hydraulic Grapple - Material Handler attachment using hydraulics to rotate and grab products
Multi Processor - Demolition Tool using excavator hydraulics for rotating jaw power
Vibrating Compactor - Vibration Compactor for soil compaction and post ramming
Wire Stripper - Strip PVC plastic cothing off copper and aluminium electrical wire
Cable Granulator - Granulate PVC plastic cothing and copper and aluminium electrical wire
  Quick Hitch

Power-Positive attachment coupling system saves time and ensures maximum excavator utilisation
 

ADVANTAGES - QUICK HITCH
No Pins to Change: The top half of the Quick Hitch is permanently mounted to the excavator while the lower half hooks onto the pins of the attachment. There is no wasteful downtime hammering out pins and no frustration trying to realign the new attachment.

Greater Breakout Force: The pin centre to centre distance is increased to maximise greater bucket ram power.

Custom Pin Configuration: The Quick Hitch can be manufactured to any OEM bucket dimensions or if required Quick Hitches can be custom made to fit a variety of attachments. With the Quick Hitch, excavators of different brands can be utilised to pick up the same attachments.

Safe: A-Ward’s Quick Hitch meets the most stringent safety standards. It uses a double mechanical self-tightening wedge locking system. When a manual Quick Hitch is fitted with a hydraulic kit for cab-operated control, the hydraulic kit’s ram is fitted with a safety pressure-locking valve in case of hydraulic failure.

High Load: Designed to be used with both mechanical and hydraulic attachments.

Tough: High tensile intermeshing steel construction, as has been used in the toughest quarry, recycling and demolition applications for over 10 years.

Quick Fit Hydraulic Kit: The hydraulic ram can be fitted to a manual Quick Hitch at any time. If any hydraulic damage occurs the wedge locking system can be re-fitted easily by the operator for zero down time.

Amplified Power: When used with A-Ward attachments the patented Power-Positive configuration creates 20% more attachment jaw force than standard pin-on attachments can achieve.

APPLICATIONS

Demolition: Coupling system allows the modern demolition contractor to change attachments quickly. Operators are able to always use the right tool and downtime is minimised.

Scrap Recycling: Large-ticket excavators are able to perform both handling and shearing applications.

Concrete Recycling: Use the same excavator to downsize concrete, load crushing plant, and cut rebar.

Land Clearing and Site Development: Interchange buckets, grapples, wood shears, rippers, rakes, etc. quickly and efficiently.

Pipeline Laying: The A-Ward Quick Hitch is perfect for constant changing from bucket to compaction equipment while laying pipe lines.

Any Job Where an Excavator Is Used: The A-Ward Quick Hitch and Strut Hook Hitch are invaluable tools in any situation requiring an excavator.