Concrete Shear - Cut reinforced concrete beams
Rail Shear - Cut railway tracks
Re-Bar Shear - Cut waste reinforcing steel (reBar)
Quick Hitch - Quick Coupler attachments for excavator
Strut Hook Hitch - Quick change attachment strut arm connection
Wood Shear - Cut waste wood, logs, stumps down to small size
Grapple Jaw - Material Handler mechanical attachment for grabing products
Steel Shear - Cut scrap steel using an excavator
Pulveriser Jaw - Crush concrete and remove reinforcing steel
Boom Hitch - Quick coupler for excavator boom and stick
Power Shear - Cut large scrap steel using an excavator
Hydraulic Breaker - Excavator hydraulic hammer for breaking rock and concrete down to small size
Alligator Shear - Cut and separate Aluminium and Stainless scrap steel
40' Container Tilter - Tilter for Load and Unload of 40' and 20' shipping container to 50 degree angle
20'Container Tilter - Tilter for Load and Unload of 20' shipping container to 90 degree angle
Hydraulic Grapple - Material Handler attachment using hydraulics to rotate and grab products
Multi Processor - Demolition Tool using excavator hydraulics for rotating jaw power
Vibrating Compactor - Vibration Compactor for soil compaction and post ramming
Wire Stripper - Strip PVC plastic cothing off copper and aluminium electrical wire
Cable Granulator - Granulate PVC plastic cothing and copper and aluminium electrical wire
  Power Shear

Process medium to heavy gauge scrap faster, more efficiently and with greater power
 

ADVANTAGES

Value and Speed: Preferred tool for processing of medium to heavy gauge scrap steel. Cycling 8-9 times per minute, this tool is faster and more affordable than other shears with this production rate.

Anti-Jam: New anti-jam relief rebate below blade surfaces releases thin, potentially jawjamming material faster. Threaded blades allow for easy removal in case of jam. Extra Heavy Duty Pivot Group: High tensile shaft, case hardened with a 360° lubricating system and fitted with semiself lubricating bushes. An increase in the bearing surface area by 40 -50% and an increase in pivot length, together with a two-into-three pivot configuration creates greater jaw rigidity and better bearing load distribution.

Innovative Blade Configuration: The Power Shear utilises 7 identical blades with 8 usable edges, each with 2 usable pierce edges, for shearing and piercing. Maximum utilisation means less consumables. Threaded blades allow for easy shimming and replacing.

Tough: Thicker manufactured material sections and the use of high tensile steel for fabrication gives the Power Shear greater durability and rigidity.

Greater Apex Shear Force: The blade apex (shear vee) has been moved closer to the main pivot even though the main pivot is larger in diameter. This enables the Power Shear to start cutting at its point of greatest force.

Greater Shear Utilisation: The shear head can be removed or replaced and fitted direct to a bucket linkage or swap for service.

Maximum Productivity: A unique speed valve and double acting jaw design using a smaller bore cylinder, coupled with the increased apex shear force, makes the A-Ward Power Shear the world’s best performing steel shear.

APPLICATIONS

Demolition: Excels at primary demolition of medium to heavy gauge L-Beams, channel, racking, re-bar, and tanks. The 360° rotation option aids in right angled pieces of steel structure for safe dismantling.

Scrap Processing: Perfect for fast processing of medium to heavy gauge material. The Power Shear’s fast cycle is perfect for sorting and shearing.