Concrete Shear - Cut reinforced concrete beams
Rail Shear - Cut railway tracks
Re-Bar Shear - Cut waste reinforcing steel (reBar)
Quick Hitch - Quick Coupler attachments for excavator
Strut Hook Hitch - Quick change attachment strut arm connection
Wood Shear - Cut waste wood, logs, stumps down to small size
Grapple Jaw - Material Handler mechanical attachment for grabing products
Steel Shear - Cut scrap steel using an excavator
Pulveriser Jaw - Crush concrete and remove reinforcing steel
Boom Hitch - Quick coupler for excavator boom and stick
Power Shear - Cut large scrap steel using an excavator
Hydraulic Breaker - Excavator hydraulic hammer for breaking rock and concrete down to small size
Alligator Shear - Cut and separate Aluminium and Stainless scrap steel
40' Container Tilter - Tilter for Load and Unload of 40' and 20' shipping container to 50 degree angle
20'Container Tilter - Tilter for Load and Unload of 20' shipping container to 90 degree angle
Hydraulic Grapple - Material Handler attachment using hydraulics to rotate and grab products
Multi Processor - Demolition Tool using excavator hydraulics for rotating jaw power
Vibrating Compactor - Vibration Compactor for soil compaction and post ramming
Wire Stripper - Strip PVC plastic cothing off copper and aluminium electrical wire
Cable Granulator - Granulate PVC plastic cothing and copper and aluminium electrical wire
  20' 90° Container Tilter

Picks up and angles containers 0° to 90° for safe, accurate and direct loading and unloading

 

ADVANTAGES - 90° Container Tilter

Safety: The A-Ward 90º Container Tilter allows containers to be removed from trailers and tilted from horizontal to 90º angle safely from a distance. At a full 90º tilt the container can be filled with up to 30 tons of product, safely from a distance.

Extra safety locks: All four cylinders are fitting with pressure control safety lock valves in case of hydraulic failure. Both front and rear container locks have two locking points on each side.

Adjustment: The dual ram design allows trailer height variation at deck height of 43” to 54” above ground. The adjustable wheel guides allow for a variation of the trailer wheels’ outside dimensions of 95” to 101”.

Productivity: The loading angle of the container can be altered as product height is increased, this improved control increases loading productivity and safety as well as maximizing product loading weights.

Simple Control: With a remote operator control unit, the tilting operation can be done safely from a distance with no chains or off-center loads. The feathering control levers aid with fast container alignment.

Self Contained: Has a13hp petrol engine, a 3000psi hydraulic pump and oil reservoir and an optional battery starter.

Container Support: At the 90º fully tilted angle the base of the container is fully supported on each of its corners for minimal container damage.