Concrete Shear - Cut reinforced concrete beams
Rail Shear - Cut railway tracks
Re-Bar Shear - Cut waste reinforcing steel (reBar)
Quick Hitch - Quick Coupler attachments for excavator
Strut Hook Hitch - Quick change attachment strut arm connection
Wood Shear - Cut waste wood, logs, stumps down to small size
Grapple Jaw - Material Handler mechanical attachment for grabing products
Steel Shear - Cut scrap steel using an excavator
Pulveriser Jaw - Crush concrete and remove reinforcing steel
Boom Hitch - Quick coupler for excavator boom and stick
Power Shear - Cut large scrap steel using an excavator
Hydraulic Breaker - Excavator hydraulic hammer for breaking rock and concrete down to small size
Alligator Shear - Cut and separate Aluminium and Stainless scrap steel
40' Container Tilter - Tilter for Load and Unload of 40' and 20' shipping container to 50 degree angle
20'Container Tilter - Tilter for Load and Unload of 20' shipping container to 90 degree angle
Hydraulic Grapple - Material Handler attachment using hydraulics to rotate and grab products
Multi Processor - Demolition Tool using excavator hydraulics for rotating jaw power
Vibrating Compactor - Vibration Compactor for soil compaction and post ramming
Wire Stripper - Strip PVC plastic cothing off copper and aluminium electrical wire
Cable Granulator - Granulate PVC plastic cothing and copper and aluminium electrical wire
  Boom Hitch

Utilise a single excavator coupled with a Boom Hitch to run both second member shears and stick mounted bucket linkage
 

ADVANTAGES

Versatile: Utilise a single excavator coupled with the A-Ward Boom Hitch. Change between second member hydraulic attachments and standard excavator stick in minutes with no auxiliary machinery or manpower. Avoid the expense of two excavators with different attachments, when one excavator can be fitted with an A-Ward Boom Hitch and utilised for both attachments.

Safe: A-Ward’s Boom Hitch meets the most stringent safety standards, with four safety locks. The special hydraulic cylinder is fitted with a pressure safety locking check valve as well as a secondary back-up manual safety cross pin, which is fitted to hold the mechanical linkage arm in the locked position; as well as two mechanical locks for each side of the main attachment pin, making this connection completely safe.

High Load: Designed to be used with both mechanical and heavy hydraulic attachments.

Easy Larger Machine Transport: With quick excavator stick removal, the boom can be lowered to fit under the required travel height and transport weight is also reduced. No longer is it a full days work to move large excavators when using A-Ward Boom Hitch.

Tough: High tensile inter meshing steel construction and anti-twisting design as has been used in the toughest quarry, recycling and demolition applications for over 5 years.